DBITsUK Essential Guides

Microfibre LCD Cleaning

Microfibre cloths do an excellent job of picking up dust and removing smudges. They will even remove oily fingerprints from a surface without spreading it around and without any additional cleaners. They are environmentally & economically friendly by reducing money spent on cleaners, paper towels and trash that has been generated. Our cleaner solutions are also environmentally friendly and safe for all types of LCD's, monitors and coated screens.

Please note: Treat any of the following screen types as you would an expensive camera lens, using high quality cleaning materials and tested techniques.

As you can see, most screens have an anti-glare coating that can be permanently scratched, so make sure your cleaning cloths do not contain any sand or grit that could damage the screen surface.

The following instructions are good, general and safe methods for keeping your screen clean without causing surface damage. Use your Microfibre screen cloths and do not apply excessive pressure.

The most common type of screen cleaning is dust on the surface of the screen. Use the microfibre screen cloth without any type of additional cleaner for everyday type screen dusting.

 For more stubborn dirt, smudges and/or fingerprint removal, use the orange microfibre screen cloth sprayed with water or moistened under the tap.

Turn off your monitor or screen. This is a safety issue; also, it is easier to see the screen surface against the dark background.

  1. Remove any larger dirt particles: Using the microfibre cloth, gently brush away any larger dirt particles. Also, wipe the edges, lifting the dust into the cloth as you go.
  2. Use the microfibre screen cloth to clean the surface. Applying light pressure, wipe the screen being careful not to overwork any area. If you have areas of the screen that do not come clean, go on to the next step.
  3. For dirt, stains or streaking that is dried onto the screen surface; moisten the cloth under the tap. It may be necessary on larger screens to work one-half or third of the screen at a time. Make sure the cloth is damp NOT wet as excess moisture could seep into the edges of the screen causing problems. Wipe the screen with the dampened cloth.
  4. Applying light pressure, work quickly to moisten the screen. You want to be able to come back to the same area before it dries. Reposition the cloth in your hand finding a drier section of cloth and continue wiping the screen to the point of most friction caused by the nearly dry screen. At this point reposition the cloth one more time, and lightly wipe to finish polish. Finally, clean the edges and corners, lifting any dust or debris into the cloth.
  5. Check the surface for any streaking or missed areas, if so; repeat the last two steps as necessary
  6. Check cloth(s) to see if cleaning is needed: if so, see next section; if not, allow to dry then store clean for next usage.

Avoid using Kleenex, paper towels, or other coarse shop towels. These materials may contain abrasives that can scratch plastic, acrylic, polycarbonate surfaces or surface coatings. Also these fabrics also can be very dusty or linty. Do not clean your screen with strong cleaners, polishes or chemically treated cloths.

Avoid these cleaning chemicals: ketone type material (Acetone), alkalis, acids, phosphates, chlorides or caustics, as they can cause damage to coatings or LCD polarizers.

We also do not recommend
any cleaner that claims to leave behind any type of surface protective coating or protective layer. Most computer monitors have an anti-glare coating on the screen surface. Anything that leaves a coating to this surface is going to affect the effectiveness of that anti-glare coating. We also have noted some hard to remove smudging from these types of cleaning products.

Microfibre Cloth Cleaning Tips:
One of the advantages of microfibre cloths is that they can be washed and reused repeatedly. Note: As with other new materials, some of the dyes used to color these materials can bleed when washed.

To sanitize; microfibre cloths may be boiled for 5-10 minutes to eliminate any bacteria that may form in the fibers.


How do I clean ink from a screen surface?
One method, which has worked well for some persons, is to saturate a clean cloth with isopropyl rubbing alcohol. With gentle wiping, this normally will remove most inks from a screen. *


* Before using any liquid cleaners on your screen, consult your manual or manufacturers recommended cleaning procedures.

 

ps
FOEB
Google
dbits Hardcore Hardware Laptop Desktop Spares Repairs Upgrade Guide
Resources
Featured Software
Fast Delivey
delivery
Powered by  MyPagerank.Net